The three remotes that ValuNet FIBER provides to its customers all operate the same concerning the instruction below. The only difference is that the Willow Remote allows the user to access their recordings by pressing the DVR button.
Record a Series that You Are Watching Right Now
- While watching the series you wish to record simply press the record button.
- Verify that the correct show is selected by looking for the title in the upper left-hand corner of the recording screen.
- Press the Right Arrow button to select the ‘Series’ option at the top of the screen.
- If so desired, press the Down Arrow button to select individual options and use the Right and Left Arrow buttons to change the options.
- After the desired options have been selected, if any, press the Up Arrow Button until the ‘Series’ Option at the top of the screen is selected again and press ‘OK’.
The DVR will start recording immediately.
Record a Series that Airs Later
- Press Guide. Navigate through the guide using the arrow, page up and page down buttons to find the series you wish to record. Select the series by highlighting it and pressing the Record button.
- Verify that the correct show is selected by looking for the title in the upper left-hand corner of the recording screen.
- Press the Right Arrow button to select the ‘Series’ option at the top of the screen.
- If so desired, press the Down Arrow button to select individual options and use the Right and Left Arrow buttons to change the options.
- After the desired options have been selected, if any, press the Up Arrow Button until the ‘Series’ Option at the top of the screen is selected again and press ‘OK’.
Recording will start the next time an episode of that series airs.
Note: If you do not select ‘Series’ when setting up the recording at the beginning the DVR will only record one episode.
After you have determined which remote you have use the menu to navigate the that remote’s page for more instructions on how to set it up and use it.